InstallCE interfaces with "Win CE Services" to download and setup vxHpc.

Windows CE Services must be operational on your Windows 95/NT system.

Double-click on the InstallCE icon to start the install process for the correct device.

vxHpc emulates the Digital VT52, VT100, VT220, VT320 and Wang 2110A terminals and
can communicate to the host via async. or TCPIP (telnet).

Other emulations are available including:
Data General, Hazeltine 1500, Hewlett Packard, Lear Siegler, Meditech, Stratus V102,
Televideo 900 series, Viewpoint, Wyse50 and Zentec 8000 terminals.
Go to http://www.cam.com for details.

The help files contain configuration, scripting and keyboard information. 
These help files (vxHpc.htc) can be accessed within vxHpc or with any desktop
browser (make sure you 'associate' the .HTC file type to the browser).


Note:
After unzipping the file there should be a directory (Folder) on your PC called
 "vxHpc Install".
This directory contains the files that will be downloaded to the HPC, HPC Pro or PPC.
If you receive an error when attempting to install
vxHpc it may mean that the directory was not created or the long file names were not
created properly.

If you receive an "CeAppMgr.exe not found" error and you are running Win CE 2.0, you
can copy the appropriate CAB file to the device and then double-tap on the file
to install the software. (May be a problem on Palm-size PC's).

If you are running Win CE 1.0 download vxHpc1.zip from www.cam.com

It is recomended that you use the program "WinZip (32-bit version)" to unzip "vxHpc.zip" and set
options to expand sub-folders and create long file names.

If you have any questions or comments please contact us at:

800/462-4481, 888/462-4481
support@cam.com